Infocus LP650 Verbindungsanleitung
LP650 Lamp Replacement Instructions
Use the chart below to interpret the LED messages.
1
Turn off the projector.
2
Unplug the power cord.
3
Allow the projector to cool for 60 minutes.
4
Remove the two screws that fasten the lamp door
to the bottom of the projector.
to the bottom of the projector.
5
Lift the lamp door up and remove it.
6
Loosen the screw that fastens the lamp module to
the projector.
the projector.
7
Remove the lamp module. Please dispose of the
module in an environmentally proper manner.
module in an environmentally proper manner.
8
Install the new module in the projector. Make
sure it is fully seated.
sure it is fully seated.