Infocus LP650 Connection Guide

LP650 Lamp Replacement Instructions  

Use the chart below to interpret the LED messages. 

1 

 

Turn off the projector. 

2 

 

Unplug the power cord. 

3 

 

Allow the projector to cool for 60 minutes. 

4 

 

Remove the two screws that fasten the lamp door 
to the bottom of the projector. 

5 

 

Lift the lamp door up and remove it. 

6 

 

Loosen the screw that fastens the lamp module to 
the projector. 

7 

 

Remove the lamp module. Please dispose of the 
module in an environmentally proper manner. 

8 

 

Install the new module in the projector. Make 
sure it is fully seated.