Infocus LP770 Installationsanweisungen

Raise the projector with the mounting bracket and slip through 
the hinge pin slot openings on the bracket into the base box. 
Loosely install the two hinge pin bolts, spacers and washers and 
the angle locking bolts. Adjust the angle and lock it. Then tighten 
the hinge pin bolts. See Figure 3 
  

 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

The ceiling should be capable of supporting a weight of 

at least five (5) times the projector(s) or 

monitor(s)weight. If it cannot, the ceiling must be 

reinforced. Proper installation procedure by qualified 

personnel as outlined in the installation instructions 

must be adhered to. Failure to do so could result in 

serious personal injury. 

 
 

 

A.  Projector  
B.  4mmx20mm Phillip Head Screws (2ea.)  
C.  4mm Quick Release Sleeves (2ea.) 
D.  Front Feet (Raise 3/8” from the projector) 
E.  4mmx10mm Knurl Knobs (2ea.)  
F. 

Projector Mount  (1ea.) 

G.  Ceiling Structure   
H.  Conical Spacer (2ea.) 
I. 

6mm Flat Washer (2ea.) 

J. 

6mmx12mm Hinge Pin bolts (2ea.)  

K.  6mmx12mm Angle Locking Bolts  (2ea.) 
L.  PBB-12L Base Box 

M. 

SP-LTMT-EXT

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 

 
 
 

27700B S.W. Parkway Ave. 

Wilsonville, Oregon 97070-9215 

Phone 1-800-294-6400  Fax

   

www.infocus.com