Saitek x52 pro Benutzerhandbuch

10 of 10

20/12/2006 08:47

seconds, i.e. 59:59, it changes to show hours and minutes. This means the next reading after 59:59 is 01:00. 

 

You can deactivate the rudder feature on your flight stick by engaging the rudder lock. When you do this, the flight 
stick no longer rotates. 

Position your flight stick unit with the three toggle switches (T1 to T6) facing you. The rudder lock can be 
seen at the base of the flight stick, on the left hand side. If you look closer, you will see that it is labelled 
RLOCK.

1.

Pull out the RLOCK switch. You may find the easiest way to do this is by using the thumb on your left hand.

2.

The twist action on the flight stick is now locked and you can no longer rotate it.

You can restore the rudder feature at any time by pushing the RLOCK switch back in.

You can optimise your comfort when using the flight stick by adjusting the height of the hand rest and pinkie switch.
If your hands are small, you can place the hand rest and pinkie switch in the highest position available. This 
reduces the distance between the trigger switch and pinkie switch, avoiding the need for you to stretch to reach 
both. If you have larger hands, you can maximise this distance and operate the flight stick in greater comfort. 

Position your flight stick unit with the three toggle switches (T1 to T6) facing away from you.

A metal screw is clearly visible about one third of the way up the back of the handle.

1.

Loosen the screw by turning it anti-clockwise.

When the screw is loose enough, you can move it freely up and down within its slot on the back of the 
handle.

Moving the screw also moves the hand rest and pinkie switch.

2.

Move the screw until the hand rest and pinkie switch are at the height you want.

3.

Place the screw in the position that best suits your preferred height. There are five positions for you to 
choose from.

4.

Tighten the screw in position by turning it clockwise.

5.