Epson C82WN Installationsanweisungen

Solving Wireless Printing Problems

Here are some troubleshooting tips if you are having trouble setting up your print 
server or printing over your wireless network.

You must have the Java Runtime Environment installed on your computer to run 
WP-Admin. Uninstall the print server software, as described on page 50, then 
reinstall it as described in the instructions on page 17 (Windows) or page 36 
(Macintosh). 

If the green light on the print server flashes continuously, it indicates a 
communication error. Try the following suggestions:

■

Move the print server and access point closer to each other and to your computer. 
Make sure they are not located near large metal objects and other devices that 
interfere with radio signals, such as cordless phones and microwave ovens.

■

Hold down the test button on the back of the print server for at least five seconds 
to reset the print server to its factory defaults. The print server’s green and yellow 
lights come on briefly when the print server resets.

Note: If you’ve already configured the print server, you need to run WP-Admin 
again to reconfigure it.

■

Make sure your computer’s wireless adapter is installed and configured correctly. 
See the instructions that came with the adapter.

■

Try restarting your computer.

■

If you’re using AirPort, make sure that AirPort is enabled in the AppleTalk 
Control Panel or Network Preferences. Also, make sure that AppleTalk and 
TCP/IP are enabled in your AirPort Admin utility and Network Preferences. 
Finally, make sure that you are using AirPort version 2.04 or later. (If you have an 
earlier version of AirPort, you can download an upgrade from Apple’s web site). 

■

If you’re using an AirPort Base Station, make sure that you’ve selected a working 
connection to your base station. If you’re using AirPort in computer-to-computer 
(ad hoc) mode, create or join a computer-to-computer network.

c82WN.book  Page 44  Thursday, January 16, 2003  2:47 PM