Epson C82WN Installationsanweisungen

Solving Wireless Printing Problems

■

Make sure the wireless mode for your computer is set to Infrastructure if you are 
connecting through an access point, or 802.11b Ad Hoc if you are connecting 
without an access point. (Your wireless adapter may use different terms. Check 
the documentation for your adapter.) Never select a pseudo ad hoc or proprietary 
ad hoc mode.

■

If you are using WEP encryption on your wireless network, disable it on your 
computer before you configure the print server. Then enable WEP on the print 
server (see page 22). When you’re done configuring the print server, enable WEP 
on your computer again.

Note: If your access point only allows WEP-enabled clients to connect to it, you 
may have to set your computer’s wireless mode to 802.11b Ad Hoc (or your 
adapter’s wireless ad hoc mode) before you configure the print server. If your 
computer’s wireless mode was originally set to Infrastructure, you can set it back 
to Infrastructure when you’re done.

■

Click 

OK

 to close the message, then click 

CONFIGURE

 again on the Wireless 

Server Search window. (If WP-Admin is picking up a signal from more than one 
print server, select the correct print server first.)

■

If you continue to see this message, move the print server closer to your computer 
and access point, if you have one. Also, move the print server away from large 
metal objects and other devices that interfere with radio signals, such as cordless 
phones and microwave ovens.

■

Your network could be malfunctioning. If you have an access point, make sure it 
is turned on and configured correctly. Try resetting the access point. See the 
instructions that came with your access point for more information.

c82WN.book  Page 45  Thursday, January 16, 2003  2:47 PM