Gateway FPD1975W Installationsanweisungen

2 

Connect your monitor to your computer

 

Follow the instructions that came with your computer.

2

 

Connect your monitor to your computer

 

Follow the instructions that came with your computer.

1 

Connect the monitor base

 

Slide the neck onto the base until it snaps into place.

1

 

Connect the monitor base

 

Slide the neck onto the base until it snaps into place.

3 

Plug in the monitor

 

To protect your monitor from power fluctuations, use a surge protector.

3

 

Plug in the monitor

 

To protect your monitor from power fluctuations, use a surge protector.

4 

Turn on the monitor and install software. 

 

Insert the Ez Tune™ CD into your computer and follow the on-screeen instructions.

4

 

Turn on the monitor and install software. 

 

Insert the Ez Tune™ CD into your computer and follow the on-screeen instructions.

© 2006 Gateway, Inc. All rights reserved. Gateway is a trademark or registered trademark of Gateway, Inc. in the U.S. and other countries. Product specifications subject to change without notice. Actual product may vary from image shown.

2 

Connect the USB 
power cord to a USB 
port on your computer.

1 

Tilt the screen back, 
center the speaker bar 
below the screen, then 
tighten the thumb 
screws.

3 

Connect the speaker 
bar’s headphone and 
microphone cables to 
your computer, then 
turn on the speaker. 

Digital DVI

(optional*)

Analog VGA

(supplied)

Connecting Your Flat Panel LCD Speaker Bar (optional)*

* Available at www.gateway.com