Gateway FPD1975W Instrução De Instalação
SETTING UP YOUR GATEWAY MONITOR
2
Connect your monitor to your computer
Follow the instructions that came with your computer.
2
Connect your monitor to your computer
Follow the instructions that came with your computer.
1
Connect the monitor base
Slide the neck onto the base until it snaps into place.
1
Connect the monitor base
Slide the neck onto the base until it snaps into place.
3
Plug in the monitor
To protect your monitor from power fluctuations, use a surge protector.
3
Plug in the monitor
To protect your monitor from power fluctuations, use a surge protector.
4
Turn on the monitor and install software.
Insert the Ez Tune™ CD into your computer and follow the on-screeen instructions.
4
Turn on the monitor and install software.
Insert the Ez Tune™ CD into your computer and follow the on-screeen instructions.
© 2006 Gateway, Inc. All rights reserved. Gateway is a trademark or registered trademark of Gateway, Inc. in the U.S. and other countries. Product specifications subject to change without notice. Actual product may vary from image shown.
2
Connect the USB
power cord to a USB
port on your computer.
power cord to a USB
port on your computer.
1
Tilt the screen back,
center the speaker bar
below the screen, then
tighten the thumb
screws.
center the speaker bar
below the screen, then
tighten the thumb
screws.
3
Connect the speaker
bar’s headphone and
microphone cables to
your computer, then
turn on the speaker.
bar’s headphone and
microphone cables to
your computer, then
turn on the speaker.
Digital DVI
(optional*)
Analog VGA
(supplied)
Connecting Your Flat Panel LCD Speaker Bar (optional)*
* Available at www.gateway.com