Sony XDP-PK1000 Handbuch

Seite von 52
12
Setting up the Cradle
Precautions
• Install the cradle on a dashboard properly so 
that the unit will not interfere with normal 
driving.
• Follow the instructions on this manual about 
dealing with the suction cup to secure the 
cradle on a dashboard. If you fail to do so, 
the adhesive strength of the suction cup may 
decrease, and the cradle may fall down.
• If the cradle becomes detached, a traffic 
accident may result. To prevent this, use the 
supplied strap.
• Keep the cradle out of the reach of children. 
Should a small part of the cradle be 
swallowed, immediately consult a doctor.
• Remove the cradle from the dashboard and 
keep it out of direct sunlight after use. 
Leaving it on a dashboard or in a car where it 
will be exposed to high temperature may 
cause malfunction, and it may also damage 
the dashboard.
• An iPod/iPhone may not be charged if you 
put it on the cradle when the temperature in 
the car is extremely high/low.
• Be careful not to splash water on the cradle. 
It may cause a malfunction.
• To disconnect the cradle cord, pull it out by 
its connector, not the cord.
Parts List
Cradle
Mounting sheet
Strap
Cord clamp
Cradle cable
Cleaning sponge for suction cup
Before Installation
• Mount the cradle on the dashboard where it 
is smooth and horizontal.
• Make sure that the surface of the dashboard 
where you intend to install the cradle is 
clean. Dirty surfaces will make the adhesive 
strength of the suction cup weak, and may 
cause unstable installation of the cradle.
• The suction cup may leave a mark on the 
dashboard, depending on the surface 
material. Your consideration is requested.
To attach the mounting sheet
Attach the mounting sheet to the dashboard 
before installing the cradle.