Sony XDP-PK1000 Handbuch
13
Notes
• Choose the mounting location carefully.
Practice installation before you actually mount
the sheet, if necessary.
the sheet, if necessary.
• Removing the mounting sheet from the
dashboard decreases the adhesive strength of
the mounting sheet. It should not be reused
after removal.
the mounting sheet. It should not be reused
after removal.
1
Peel the paper from the mounting sheet, and
then stick the mounting sheet to the
dashboard.
then stick the mounting sheet to the
dashboard.
Allow 24 hours after sticking the mounting
sheet on the dashboard before installing the
cradle on it.
sheet on the dashboard before installing the
cradle on it.
Installation
1
Mount the clip of the strap on the
defroster of your car.
defroster of your car.
2
Place the hoop of the strap over the
cradle and attach the strap as shown in
the illustrations below.
cradle and attach the strap as shown in
the illustrations below.
Notes
• After you attach the strap to the cradle, pull
the strap gently to make sure that the strap
is securely attached to the cradle.
is securely attached to the cradle.
• Do not forcefully pull the cradle after
attaching the strap. Doing so may damage
your car.
your car.
3
Remove the cover from the suction cup
gently.
gently.
Note
• It may be difficult to remove the cover from
the suction cup as the adhesive strength of
the suction cup is strong.
the suction cup is strong.
4
Press down the suction cup gradually,
expelling the air under the suction cup
(
expelling the air under the suction cup
(
), and press the PUSH button to
attach the cradle on the dashboard
(
(
).
Notes
• If the suction cup contains air, the adhesive
strength of the suction cup will be
weakened.
weakened.
• Make sure that the suction cup is dry before
mounting the cradle.
Peel off paper
Cover