D-Link DFL-1600 Verweisanleitung
2.7. BUFFERS
These log messages refer to the BUFFERS (Events regarding buffer usage) category.
2.7.1. buffers_flooded (ID: 00500001)
Default Severity
Log Message
The buffers were flooded for <duration> seconds. Current usage is
<buf_usage> percent
<buf_usage> percent
Explanation
The unit was temporarily out of buffers for a period of time. This
could be a result of a period of heavy network traffic load.
could be a result of a period of heavy network traffic load.
Gateway Action
None
Recommended Action
If this is a reoccurring event, try increasing the number of
HighBuffers.
HighBuffers.
Revision
1
Parameters
duration
buf_usage
buf_usage
2.7.2. buffers_profile (ID: 00500002)
Default Severity
Log Message
Buffer requested by <reason> used at total of <duration> ticks and was
touched <numstop> times
touched <numstop> times
Explanation
A buffer associated with a profiling request has been identified. This
log message will only be generated by special built firmware for the
purpose of debugging.
log message will only be generated by special built firmware for the
purpose of debugging.
Gateway Action
None
Recommended Action
Nothing.
Revision
1
Parameters
numstop
duration
reason
duration
reason
Context Parameters
2.7. BUFFERS
Chapter 2. Log Message Reference
160