D-Link DFL-1600 Verweisanleitung
2.16. HWM
These log messages refer to the HWM (Hardware monitor events) category.
2.16.1. temperature_alarm (ID: 04000011)
Default Severity
Log Message
Temperature monitor <index> (<name>) is outside the specified limit.
Current value is <current_temp> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
Current value is <current_temp> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
Explanation
The unit may be overheating, this may be because the cooling is failing
or to hot enviroment.
or to hot enviroment.
Gateway Action
none
Recommended Action
Shutdown the unit and determine the problem.
Revision
1
Parameters
index
name
unit
current_temp
min_limit
max_limit
name
unit
current_temp
min_limit
max_limit
2.16.2. temperature_normal (ID: 04000012)
Default Severity
Log Message
Temperature monitor <index> (<name>) is outside the specified limit.
Current value is <current_temp> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
Current value is <current_temp> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
Explanation
The sensor reports that the temperature value is back in the normal
range.
range.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
index
name
unit
current_temp
min_limit
max_limit
name
unit
current_temp
min_limit
max_limit
2.16.3. voltage_alarm (ID: 04000021)
Default Severity
2.16. HWM
Chapter 2. Log Message Reference
220