D-Link DFL-1600 Verweisanleitung
2.18. IDPPIPES
These log messages refer to the IDPPIPES (IDP Traffic Shaping events) category.
2.18.1. conn_idp_piped (ID: 06100001)
Default Severity
Log Message
IDP Pipe event triggered. Throughput limited to <limit>
Explanation
An IDP rule with Pipe event triggered on the specified connection. The
connection is piped to [limit] kbps.
connection is piped to [limit] kbps.
Gateway Action
limit_throughput
Recommended Action
None.
Revision
1
Parameters
limit
Context Parameters
2.18.2. host_idp_piped (ID: 06100002)
Default Severity
Log Message
Dynamic pipe state added for host <host>. Throughput limited to
<limit> for all new connections for <ttl> seconds
<limit> for all new connections for <ttl> seconds
Explanation
An IDP Pipe event triggered. The host [host] will be dynamically
piped with a total throughput of [limit] kbps. All new connections to
and from this host will be piped for [ttl] seconds.
piped with a total throughput of [limit] kbps. All new connections to
and from this host will be piped for [ttl] seconds.
Gateway Action
host_idp_piped
Recommended Action
None.
Revision
1
Parameters
host
limit
ttl
limit
ttl
Context Parameters
2.18.3. out_of_memory (ID: 06100003)
Default Severity
Log Message
Out of memory
Explanation
An attempt to allocate memory failed.
Gateway Action
host_state_creation_aborted
Recommended Action
Issue the "memory" CLI command and check for modules with
2.18. IDPPIPES
Chapter 2. Log Message Reference
233