D-Link DFL-1600 Verweisanleitung
2.46. TRANSPARENCY
These log messages refer to the TRANSPARENCY (Events concerning the Transparent Mode
feature) category.
feature) category.
2.46.1. impossible_hw_sender_address (ID: 04400410)
Default Severity
Log Message
Impossible hardware sender address 0000:0000:0000. Dropping.
Explanation
Some equipment on the network is sending packets with a source
MAC address of 0000:0000:0000. These packets will be dropped.
MAC address of 0000:0000:0000. These packets will be dropped.
Gateway Action
drop
Recommended Action
Investigate
if
there
are
equipment
sending
packets
using
0000:0000:0000 as source MAC address. If there are, try to change the
behaviour of that equipment.
behaviour of that equipment.
Revision
1
Context Parameters
2.46.2. enet_hw_sender_broadcast (ID: 04400411)
Default Severity
Log Message
Ethernet hardware sender is a broadcast address. Accepting.
Explanation
The Ethernet hardware sender address is a broadcast address. The
packet will be accepted.
packet will be accepted.
Gateway Action
accept
Recommended Action
None.
Revision
1
Context Parameters
2.46.3. enet_hw_sender_broadcast (ID: 04400412)
Default Severity
Log Message
Ethernet hardware sender is a broadcast address. Rewriting to the
address of the forwarding interface.
address of the forwarding interface.
Explanation
The Ethernet hardware sender address is a broadcast address. The
packet will be rewritten with the hardware sender address of the
forwarding interface.
packet will be rewritten with the hardware sender address of the
forwarding interface.
Gateway Action
rewrite
Recommended Action
None.
2.46. TRANSPARENCY
Chapter 2. Log Message Reference
445