D-Link DFL-1600 Benutzerhandbuch
If one administrator logs in, then a second or more will be allowed to login but they will only have
audit privileges. In other words the second or more administrators who login will only be able to
read configurations and will not be able to change them.
audit privileges. In other words the second or more administrators who login will only be able to
read configurations and will not be able to change them.
2.1.3. The Web Interface
NetDefendOS provides an intuitive Web Interface (WebUI) for management of the system via an
Ethernet interface using a standard web browser. This allows the administrator to perform remote
management from anywhere on a private network or the public Internet using a standard computer
without having to install client software.
Ethernet interface using a standard web browser. This allows the administrator to perform remote
management from anywhere on a private network or the public Internet using a standard computer
without having to install client software.
Assignment of a Default IP Address
For a new D-Link NetDefend firewall with factory defaults, a default internal IP address is assigned
automatically by NetDefendOS to the hardware's LAN1 interface (or the LAN interface on models
wihout multiple LAN interfaces). The IP address assigned to the management interface differs
according to the NetDefend model as follows:
automatically by NetDefendOS to the hardware's LAN1 interface (or the LAN interface on models
wihout multiple LAN interfaces). The IP address assigned to the management interface differs
according to the NetDefend model as follows:
•
On the NetDefend DFL-210, 260, 800, 860, 1600 and 2500, the default management interface IP
address is 192.168.1.1.
address is 192.168.1.1.
•
On the NetDefend DFL-260E, 860E, 1660, 2560 and 2560G, the default management interface
IP address is 192.168.10.1.
IP address is 192.168.10.1.
Setting the Management Workstation IP
The default management Ethernet interface of the firewall and the external workstation computer's
Ethernet interface must be members of the same logical IP network for communication between
them to succeed. Therefore, the connecting Ethernet interface of the workstation must be manually
assigned the following static IP values:
Ethernet interface must be members of the same logical IP network for communication between
them to succeed. Therefore, the connecting Ethernet interface of the workstation must be manually
assigned the following static IP values:
DFL-210/260/800/860/1600/2500
DFL-260E/860E/1660/2560/2560G
IP Address: 192.168.1.30
IP Address: 192.168.10.30
Subnet Mask: 255.255.255.0
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Default Gateway: 192.168.10.1
Logging on to the Web Interface
To access the Web Interface using the factory default settings, launch a web browser on the external
workstation computer (the latest version of Internet Explorer or Firefox is recommended) and point
the browser at the IP address:
workstation computer (the latest version of Internet Explorer or Firefox is recommended) and point
the browser at the IP address:
DFL-210/260/800/860/1600/2500
DFL-260E/860E/1660/2560/2560G
IP Address: 192.168.1.1
IP Address: 192.168.10.1
When performing initial connection to NetDefendOS, the administrator must use https:// as the
URL protocol in the browser (in other words, https://192.168.1.1 or https://192.168.10.1 according
to model ). Using HTTPS ensures that communication with NetDefendOS is secure.
URL protocol in the browser (in other words, https://192.168.1.1 or https://192.168.10.1 according
to model ). Using HTTPS ensures that communication with NetDefendOS is secure.
If communication with the NetDefendOS is successfully established, a user authentication dialog
similar to the one shown below will then be shown in the browser window.
similar to the one shown below will then be shown in the browser window.
2.1.3. The Web Interface
Chapter 2. Management and Maintenance
30