Canon PIXMA SELPHY CP1200 Betriebsanweisung

39

Printing in progress cannot be canceled from SELPHY by using the <v> 

button. Use the camera to stop printing.

You can also connect the printer to a camera via an existing access point. In 

this case, connect the printer and camera to the same access point. For details 

The printer does not enable communication between the devices connected 

to it.

Once you have completed the connection settings (

 – 

second, standby screen in step 6 is displayed automatically when you 

turn on the printer. To print, after the standby screen is displayed, simply 

use the camera as described in steps 5 – 6.

During standby-screen display, you can view the SSID and password by 

pressing the <o> button.

Even during standby, you can print images on a memory card by 

Before you can print via Wi-Fi from a computer, the computer with the 

images to send must be connected to an access point.

Use an access point that supports the following Wi-Fi standards. To 

check the standards your access point supports, refer to the access point 

user manual.

IEEE 802.11b/g

1 – 11

DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g)

No security, 64- and 128-bit WEP (open system authentication), 

WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and 

WPA2-PSK (AES)