Canon PIXMA SELPHY CP1200 Betriebsanweisung

37

If you cannot print, check the following.

Confirm that SELPHY is on. If SELPHY is on, try restarting it to see if the 

problem is resolved.

Confirm that SELPHY is connected via Wi-Fi to the same access point as 

the Apple device.

Confirm that the paper and ink cassettes are loaded correctly.

Remove any inserted memory cards, USB flash drives, or USB cables.

Confirm that no error messages are displayed on SELPHY.

Try resetting the Wi-Fi settings (

) and connecting again.

, 

) 

to make sure SELPHY can print correctly. If printing is still not possible, see 

“Troubleshooting” (

It may take a few minutes after you turn on SELPHY before Wi-Fi 

communication is possible. Confirm that SELPHY is connected to the access 
point (

You can print as follows by connecting the printer to a camera compatible 

with DPS over IP, the PictBridge standard for Wi-Fi connections.

z

z

Remove any inserted memory cards or 

USB flash drives.

z

z

Insert a loaded paper cassette and an 

ink cassette in SELPHY. Refer to “Initial 

z

z

Press the <k> button.

z

z

Press the <u><d> buttons to select 

[Wi-Fi Settings], and then press the 

<o> button.

z

z

Press the <u><d> buttons to select 

[Connection Settings], and then press the 

<o> button.