Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Canon
  4. imagePROGRAF iPF8400S
  5. Handbuch

Canon imagePROGRAF iPF8400S Handbuch

Download
Seite von 1012
The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen
An error message is shown on the Display Screen
Cause
Corrective Action
The last portion of roll paper was used during a print job, and paper could not
be advanced because the trailing edge is taped to the roll.
Remove the used roll and insert a new roll.
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Cause
Corrective Action
The leading edge of the roll paper was
cut to straighten it.
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other
than Off in the Control Panel menu.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and make sure the Printhead is in good condition for
printing.
A print job was received from an in-
compatible printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer is damaged.
Contact your Canon dealer for assistance.
iPF8400S
                                                                                                                                                     
An error message is shown on the Display Screen
                                                                                                                                                                                                                             
 
 
Troubleshooting
The printer stops during a print job
941