Canon imagePROGRAF iPF850 Handbuch
Condition
Status
Judgment result
Condition 7 Are the widths of roll paper 1 and roll paper 2 differ-
ent?
The roll paper width is the same
*1:In the following case, neither roll paper 1 nor roll paper 2 is fed to the platen. In this case, roll paper 1 is selected.
•
When the printer enters sleep mode and then resumes
•
When the printer is turned on
•
When cut sheet is supplied and ejected
If the Detect Mismatch setting is set to Warning or None
Condition
Status
Judgment result
Condition 1 Is the roll paper loaded in the printer long enough
to print the paper size specified in the print job?
Only either roll paper 1 or roll paper
2 is long enough
2 is long enough
The roll paper with
enough length is selec-
ted
enough length is selec-
ted
Neither roll paper 1 nor roll paper 2 is
long enough
long enough
Error
Both roll paper 1 and roll paper 2 are
long enough
long enough
Go to Condition 2
ManageRemainRoll is set to Off in
the printer menu (the roll paper
length cannot be identified)
the printer menu (the roll paper
length cannot be identified)
Condition 2 Does the roll paper loaded in the printer match the
media type specified in the print job?
Only either roll paper 1 or roll paper
2 matches
2 matches
The roll paper with the
matched media type is
selected
matched media type is
selected
Neither roll paper 1 nor roll paper 2
matches
matches
Go to Condition 3
Both roll paper 1 and roll paper 2
match
match
Condition 3 What is the Roll Switching setting in the printer
menu?
Set to No RollSwitching
Set to Use Optimal Size
Go to Condition 4
Condition 4 Borderless printing is specified in the print job (if
not specified, go to Condition 5)
Only either roll paper 1 or roll paper
2 is paper that can be used for bor-
derless printing
2 is paper that can be used for bor-
derless printing
The roll paper that can
be used for borderless
printing is selected
be used for borderless
printing is selected
Neither roll paper 1 nor roll paper 2 is
paper that can be used for border-
less printing
paper that can be used for border-
less printing
Error
Both roll paper 1 and roll paper 2 are
paper that can be used for border-
less printing
paper that can be used for border-
less printing
Go to Condition 5
Condition 5 Does the roll paper width specified in the print job
match the width of roll paper loaded in the printer?
(Only for borderless printing or enlarged/reduced
printing)
(Only for borderless printing or enlarged/reduced
printing)
Only either roll paper 1 or roll paper
2 is roll paper of the width specified
in the print job
2 is roll paper of the width specified
in the print job
The roll paper with the
matched roll paper
width is selected
matched roll paper
width is selected
Neither roll paper 1 nor roll paper 2 is
roll paper of the width specified in the
print job
roll paper of the width specified in the
print job
Go to Condition 6
Both roll paper 1 and roll paper 2 are
roll paper of the width specified in the
print job
roll paper of the width specified in the
print job
The roll paper width is not specified
in the print job
in the print job
Condition 6 Does the width of roll paper loaded in the printer
accommodate the width of the paper size specified
in the print job?
in the print job?
Only either roll paper 1 or roll paper
2 accommodates the paper size
width specified in the print job
2 accommodates the paper size
width specified in the print job
The roll paper that ac-
commodates the paper
size width is selected
commodates the paper
size width is selected
iPF850
Roll Paper Switching Method
Enhanced Printing Options
Using double-roll printing
41