Olympus E-5 Gebrauchsanleitung

77

EN

j Assign the flash intensity control function to the main dial (or sub dial). g“DIAL 

FUNCTION” (P. 104)

x

• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera’s flash 

intensity setting.

• When [w+F] is set to [ON], the flash intensity value will be added to the exposure 

compensation value. 

g“w+F” (P. 112)

The camera shoots multiple frames, changing the amount of light emitted by the flash for 
each shot. The camera shoots 3 frames at a time with the following amount of light: optimum 
light, light adjusted in the – direction, and light adjusted in the + direction.

• The compensation value will change according to the EV 

step. 

g“EV STEP” (P. 111)

• In single-frame shooting, the amount of light emitted by 

the flash changes every time the shutter button is 
pressed.

• In sequential shooting, hold down the shutter button until 

the selected number of frames are taken.

• Releasing the shutter button stops flash bracketing 

shooting. When it stops, 

0 blinks in the viewfinder 

and on the control panel and 

0 is displayed in green 

on the super control panel.

w + k

i

p: [w]

MENU [X] [BRACKETING] [FL BKT]

F button

k

w button

s0033_e_00_0_unified.book  77 ページ  ２０１０年１１月１６日　火曜日　午後５時２４分