Netgear AirCard 801S (Clear 4G) – Clear Spot 4G plus for Clear Betriebsanweisung
Settings
Rev 1.0 Apr.10
99
Enabling Port Forwarding
Before you can use or configure Port Forwarding, you must enable it.
1.
Log in to the home page.
2.
Click
Advanced settings
(
).
3.
Click
Router > Basic
.
4.
Next to
Port Forwarding
, select
Enable
.
5.
Click
Save
.
Enabling Port Forwarding for an Application
1.
2.
Display the "Port forward" window.
a.
Log in to the home page.
b. Click
Advanced settings
(
).
c.
Click
Router > Port Forward
.
3.
In the last row of the table, click the
Application
field, and select the application
type from the list.
The values for
Start
and
End
ports are automatically filled in.
4.
If necessary, change the range of port numbers associated with the appli-
cation. Traffic will be allowed (not blocked) if its destination port number is in
the specified range.
cation. Traffic will be allowed (not blocked) if its destination port number is in
the specified range.
a.
In the
Start
field, enter the number that starts the port range.
b. In the
End
field, enter the number that ends the port range.
If the range consists of only one port, enter the number that you entered
in the
in the
Start
field.
5.
In the
Protocol
list, click the protocol(s) used for this application (TCP, UDP, or
both).
6.
In the
IP Address
field, enter the IP address of the server to be accessed.
7.
Ensure
Enable
is selected.
8.
Click
Add
.
9.
Click
save
.
Disabling Port Forwarding for an Application
1.
2.
Display the "Port forward" window.
a.
Log in to the home page.
b. Click
Advanced settings
(
).
c.
Click
Router > Port forward
.