KitchenAid 48-Inch 6-Burner with Steam-Assist Oven, Dual Fuel Freestanding Range, Commercial-Style Benutzung Und Pflege

Seite von 80
31
CARE AND CLEANING
COOKTOP CONTROLS
Pull the knobs straight away from the control panel to remove.
Know Your Cooktop Controls
 
To avoid damage to the cooktop controls, do not use steel 
wool, abrasive cleansers, or oven cleaner.
 
To avoid damage, do not soak knobs.
 
When replacing knobs, make sure knobs are in the OFF 
position.
 
Do not remove seals under knobs.
 
When replacing knobs after cleaning either the surface 
burner controls or the griddle module control, make sure 
the knobs are replaced to the correct location. The power 
burner knobs have power settings, and the griddle knob 
has temperature settings. All other knobs have Hi, Med, Lo 
settings only.
STAINLESS STEEL 
(ON SOME MODELS)
Use affresh
®
 Stainless Steel Cleaner or affresh
®
 Stainless Steel 
Cleaning Wipes (not included). Rub in direction of grain to avoid 
possible damage to the steel surface.
Do not use:
 
Soap-filled scouring pads
 
Abrasive cleaners
 
Cooktop polishing creme
 
Steel-wool pads
 
Gritty washcloths
 
Abrasive paper towels
1.
Remove knobs.
2.
Clean with warm, soapy water.
Use cleaner or wipes.
CONTROL PANEL
Locking buttons avoids touch screen activation during cleaning.
Apply glass cleaner to soft cloth or sponge – not directly on panel, 
or use affresh
®
 Kitchen and Appliance Cleaner (not included).
Do not use:
 
Abrasive cleaners
 
Steel-wool pads
 
Gritty washcloths
 
Abrasive paper towels
 
When replacing knobs after cleaning either the surface 
burner controls or the griddle module control, make sure 
the knobs are replaced to the correct location. The power 
burner knobs have power settings, and the griddle knob 
has temperature settings. All other knobs have Hi, Med, Lo 
settings only.
DOOR EXTERIOR
Apply glass cleaner to soft cloth or sponge – not directly on panel, 
or use affresh
®
 Kitchen and Appliance Cleaner (not included).
1.
Activate the lock buttons. Touch and hold START until 
“controls locked” appears in the display and a confirmation 
tone sounds.
2.
Apply cleaner.
Apply cleaner.