Xerox Xerox 6030 Wide Format Solution Betriebsanweisung

Page 48 

Web Print Manager Tool User Guide

 

Ÿ For the Media Type listed at the top of the page, select the “Document Type” and 

“Raster Halftone Method” from the drop down menus. 

Ÿ Press the Get Settings button.  This will show the current settings for the selected 

media type, document type, and raster halftone method. 

Ÿ Select the Cyan, Magenta, Yellow, or Black radio button.  Click and drag the colored 

dots vertically on the graph line for the specified media type and document type. The 
Input and Output Values will show under the graph.  Repeat for each color. Note that 
modifying the color curves in this way only changes the colors for the currently 
selected document type. 

Ÿ Move the sliding gamma and ink limit arrows to adjust the color settings for the 

currently selected color curve.  Note that this will modify the Gamma and Ink Limit for 
all of the document types, not just the selected one. 

Ÿ Pressing the Undo button will remove the changes that were made since the last time 

that the Update Printer button was pressed.  

Ÿ Pressing the Redo button will put back the settings as they were before the Undo 

button was pressed. 

Note that multiple-level Undo and Redo is supported and that pressing the Update 
Printer button will clear out the Redo buffer. 

• 

Pressing the Reset Factory TRCs button will put back the TRC curves for the 
specified Media Type and Document Type to their factory default values. 

• 

Press the Update Printer button to  send the new values to the printer. 
 

3.  If you are on the Media Specific Settings Text Form page, do the following: 

Ÿ For the Media Type listed at the top of the page, select the “Document Type” and 

“Raster Halftone Method” from the drop down menus. 

Ÿ Press the Get Settings button. This will show the current settings for the  

selected media type, raster halftone method, and the selected document type. 

Ÿ Manually type in the color curve values to adjust the color curves for the selected 

media type and document type.  Note that the values that are entered will be further 
adjusted by the gamma and ink limit, so if you want to directly modify the input/output 
you should set gamma to 1.0 and ink limit to 100%.  

Ÿ Pressing the Reset Page button will reset to the values before you edited this table. 

Ÿ Pressing the Reset Factory TRCs button will put back the TRC curves for the 

specified Media Type and Document Type to their factory default values. 

Ÿ Press the Update Printer button to  send the new values to the printer.