Xerox 4213 MICR MRP Betriebsanweisung
CARE AND MAINTENANCE
Adjusting the print density
The print density has been adjusted to the proper level at the
factory and normally does not require any adjustment. From
time to time, however, it may be necessary to adjust the print
density for darker or lighter prints for one or more of the
following reasons:
factory and normally does not require any adjustment. From
time to time, however, it may be necessary to adjust the print
density for darker or lighter prints for one or more of the
following reasons:
•
The print density may need to be increased or decreased
when a different paper is used
when a different paper is used
•
The print density may need to be increased or decreased
when temperature and/or humidity have changed
dramatically.
when temperature and/or humidity have changed
dramatically.
The print density may be made darker or lighter by performing
the following procedure:
the following procedure:
1.
Open the top cover by lifting the top cover access handle.
2.
Turn the print density control knob to the right (clockwise)
for darker printing, or to the left (counterclockwise) for
lighter printing.
for darker printing, or to the left (counterclockwise) for
lighter printing.
Note: Even if you turn the knob all the way to the right or left,
the print density changes only slightly.
the print density changes only slightly.
Caution: Avoid touching the shiny, blue surface of the print
cartridge. Damage to the blue surface can cause print defects.
cartridge. Damage to the blue surface can cause print defects.
XEROX 4213 LASER PRINTER USER GUIDE
5-63