Xerox 4213 MICR MRP Betriebsanweisung
CARE AND MAINTENANCE
3.
Close the top cover by pushing it down until it latches into
place and is flush with the cover.
place and is flush with the cover.
Cleaning the printer
When the printer exterior becomes dirty, clean it, and keep the
following points in mind:
following points in mind:
WARNING: The power to the printer should be off before
cleaning the printer. The power switch should be in the “O”
position.
cleaning the printer. The power switch should be in the “O”
position.
•
Use a soft dry cloth to remove dust and dirt on the outer
surface of the printer. If dirt is hard to wipe off with a dry
cloth, clean it with a cloth slightly moistened with water.
Ensure the cloth is not dripping wet.
surface of the printer. If dirt is hard to wipe off with a dry
cloth, clean it with a cloth slightly moistened with water.
Ensure the cloth is not dripping wet.
•
Be careful not to get water inside the printer.
•
Never use alcohol or thinner.
5-64
XEROX 4213 LASER PRINTER USER GUIDE