Xerox Phaser 300X Installationsanleitung
7
Using Color
7-14
Phaser 300X Color Printer
a.
Locate the LaserWriter Utility in the PhaserTools folder on your
hard disk, and double-click its icon to start the application.
hard disk, and double-click its icon to start the application.
b.
Choose Download PostScript File from the Utilities menu.
c.
Select the No Color Correction file from the list, then click
Open
Open
. (This file was installed in the Printer Utilities folder
inside the PhaserTools folder.)
d.
At the prompt
Save PostScript output as:
you are
asked for a file name for saving printer output. Use either the
default name given in the edit box or type a new name.
Click Save to send the file to the printer.
default name given in the edit box or type a new name.
Click Save to send the file to the printer.
e.
If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
displays a dialog box; click OK to continue.
7.
Select PANTONE Colors within an application using the colors on
the chart.
the chart.
8.
Print your document using one of the following methods:
If you are printing from a supported driver (such as
Adobe PSPrinter or Phaser 300X GX):
Adobe PSPrinter or Phaser 300X GX):
Print your document with the following selections. Any other
selections in the driver will cause the PANTONE Colors to print
differently.
selections in the driver will cause the PANTONE Colors to print
differently.
■
None
color correction option
■
Standard
print quality mode