Xerox Xerox 6030 Wide Format Solution Betriebsanweisung
225
10.5 Logical Printer Settings
Descriptions of Area Mode
The various area modes are described below.
ADAPTED
ADAPTED
The data range of the input image is set as the print range.
Ö
See
Fig.1
FIXED (HP-GL)
The range that encloses the maximum coordinate of the input
image and the coordinates that represent the starting point of that
coordinate is set as the print range.
image and the coordinates that represent the starting point of that
coordinate is set as the print range.
FIXED (HP-GL/2)
The range that encloses the maximum coordinate of the input
image and a starting point of (0.0) is set as the print range.
image and a starting point of (0.0) is set as the print range.
Ö
See
Fig.2.
IP AREA
The range specified with the [IP Command] is set as the print
range.
range.
Ö
See Fig.3.
IW AREA
The range specified with the [IW Command] is set as the print
range.
range.
Ö
See Fig.3.
RASTER
The range that corresponds with the input size specified with the
[Destination Raster] command is set as the print range.
[Destination Raster] command is set as the print range.
FIRST
Only the first quadrant area is set as the print area.
Ö
See Fig.4.
Images located in areas outside of the first quadrant area will not
be printed.
be printed.
Ö
See Fig.5.
Fig.1. (ADAPTED)
Fig.2. (FIXED)
(0,0)
Input image
Output image
Offset
Auto Layout: [NO]
Auto Layout: [YES]
Input image
(+X1,+Y1)
(0,0)
Offset
Output image
Auto Layout: [NO]
Auto Layout: [YES]