Honeywell Series 3: Wireless Portable Doorbell with Strobe Light and Push Button (RDWL313A) Installationsanleitung

1.  Mount the push button 

bracket in the desired 
location. 
Use the screws 
–OR– 
Use the adhesive backing. If 
using the adhesive backing, 
clean the surface first.

2.  Snap the push button onto 

the mounting bracket.

Note: If you need to remove the push button, use a small 
screwdriver to release the tab.

If you are not mounting the doorbell to the wall, place it where you want it.

1.  Screw the doorbell wall mounting bracket 

to the wall using the included screws and 
anchors (if necessary). 

Drill 1/4 inch holes for the anchors.

2.  Hang the doorbell on the 

mounting bracket.