Honeywell Series 3: Wireless Portable Doorbell with Strobe Light and Push Button (RDWL313A) Installationsanleitung

You can connect up to 4 accessories to your doorbell, including other push 
buttons, window or door opening sensors, and motion 
sensors.

If you try to connect more accessories than the max 
number, the LED on the side blinks red.

1.  Press and hold the Setting button on the doorbell for three seconds.  

The LED on the side turns on with 
an amber color. 

2.  Within 20 seconds of pressing the 

Setting button, wave or make some 
other kind of motion in front of the 
motion sensor.

Follow these steps to change the ring and light setting for an existing doorbell, 
too.

1.  Press and hold the Setting button 

on the doorbell for three seconds.  
The LED on the side turns on with an 
amber color. 

2.  Press the push button.

3.  Within 12 seconds of pressing the 

push button, press the Music button 
to select the ring for that push 
button.

4.  Within 12 seconds of pressing the 

doorbell, press the Sunlight button 
to select a light setting for that push 
button.