Cisco Cisco Clean Access 3.5
4-19
Cisco Clean Access Manager Installation and Administration Guide
OL-7044-01
Chapter 4 Switch Management and Cisco Clean Access Out-of-Band (OOB)
Configure OOB Switch Management in the CAM
4.
When out-of-band is enabled, the Monitoring > View Online Users page displays links for both
In-Band and Out-of-Band users and display settings (see
In-Band and Out-of-Band users and display settings (see
Figure 4-10
View Out-of-Band Online Users
Configure Group Profiles
When you first add a switch to the Clean Access Manager’s domain (under Switch Management >
Devices), a Group profile must be applied to add the new switch. There is a predefined Group profile
called default, shown in
Devices), a Group profile must be applied to add the new switch. There is a predefined Group profile
called default, shown in
. All switches are automatically put in the default group when you
add them. You can leave this default Group profile setting, or you can create additional Group profiles
as needed. If you are adding and managing a large number of switches, creating multiple Group profiles
allows you filter which sets of devices to display from the list of switches (under Switch Management
> Devices > Switches > List).
as needed. If you are adding and managing a large number of switches, creating multiple Group profiles
allows you filter which sets of devices to display from the list of switches (under Switch Management
> Devices > Switches > List).
Figure 4-11
Group Profiles List
Out-of-band user
display settings