Cisco Cisco IGX 8400 Modules Fehlerbehebungsanleitung
CVM and UVM Hardware Error Summary
Document ID: 10802
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
CVM Card Error Summary
CVM Card Failure Codes
UVM Card Error Summary
UVM Card Failure Codes for Category 06
Example of the dspcderr Command Output
Related Information
Prerequisites
Requirements
Components Used
Conventions
CVM Card Error Summary
CVM Card Failure Codes
UVM Card Error Summary
UVM Card Failure Codes for Category 06
Example of the dspcderr Command Output
Related Information
Introduction
The hardware error codes discussed in this document can occur on the on the Channelized Voice Module
(CVM) and Universal Voice Module (UVM) card on a Cisco IGX switch. They are displayed when you issue
the dspcderrs slot−num command.
(CVM) and Universal Voice Module (UVM) card on a Cisco IGX switch. They are displayed when you issue
the dspcderrs slot−num command.
Prerequisites
Requirements
The readers of this document should be knowledgeable of this topic.
Cisco IGX hardware and software.
•
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
For more information on document conventions, refer to Cisco Technical Tips Conventions.
CVM Card Error Summary
Byte 1 − Function code
Byte 2 − Error function code
Byte 3 − Error category
01 − Download Failure
02 − Powerup Failure
03 − Selftest Failure
04 − Memory test failure
05 − Boot PROM failure
06 − Non Boot PROM (Firmware) failure
Byte 4 − Slot Number
Byte 5 − Processor