Cisco Cisco Packet Data Gateway (PDG)

 

▄  Statistics and Counters Reference, StarOS Release 17  

This command only displays output if bucket interval CONNECTION_TIME has been configured via the Global 
Configuration mode session disconnect-reasons bucket-interval command. 

This feature is configured via the CLI command which sets a time interval value that is sent to all sessmgrs. Each 
sessmgr fills buckets with disconnect reason counts indexed by the time interval. The time interval for filling the 
buckets is indexed relative to time hh:00. For example: if the time interval is 5 minutes, the bucket is filled at hh:00, 
hh:05, hh:10, hh:15. So if current time is 06:57, buckets with values will be 06:55:00, 06:50:00 and 06:45:00.  

 

 

Total 
Disconnects 

The total number of sessions disconnected since the system was started or since the last time that session 
disconnect reasons was cleared. 
If CONNECTION_TIME is recently configured and the first timer has not expired (no buckets are filled yet), 
“NA” is displayed in place of timestamps for those buckets which are not filled. “NA” also appears if the buckets 
have been cleared with the clear session disconnect-reasons [buckets] command. 

Disconnect 
Reason 

The reason sessions were disconnected. Only reasons that have disconnects associated with them are listed. 

  

interval 

Month-Day-Timestamp of the bucket interval. This column displays the cumulative count of disconnect reasons 
at that timestamp calculated since beginning. 

Num Disc 

The number of sessions disconnected for the associated reason during this bucket interval. 

Percentage 

The percentage of total disconnects for the associated reason during this bucket interval.