Cisco Cisco FirePOWER Appliance 7125 Installationsanleitung

Version 5.3

Sourcefire 3D System Installation Guide

214

Restoring a Sourcefire Appliance to Factory Defaults

Using the Interactive Menu to Restore an Appliance

Chapter 7

2. Select the system software update, if any, you want to use.

You do not have to select an update; press Enter without selecting an update 

to continue. If there are no system software updates in the appropriate 

location, the system prompts you to press Enter to continue.
The restore utility retrieves and displays a list of rule update files. If you are 

using SCP, enter your password when prompted to display the list.

3. Select the rule update, if any, you want to use.

You do not have to select an update; press Enter without selecting an update 

to continue. If there are no rule updates in the appropriate location, the 

system prompts you to press Enter to continue.
Your choices are saved and the main menu appears again.

4. Continue with the next section, 

.

Downloading the ISO and Update Files and Mounting the Image

: Any

: Any except DC1000, DC3000

The final step before you invoke the restore process is to download the necessary 

files and mount the ISO image.

Before you begin this step, you may want to save your restore configuration 

for later use. For more information, see 

 on page 217.

To download and mount the ISO image:

: Admin

1. From the main menu, select 4 Download and Mount ISO. 
2. When prompted, confirm your choice. If you are downloading from an SCP 

server, enter your password when prompted.
The appropriate files are downloaded and mounted. The main menu appears 

again.

3. Continue with the next section, 

.

Invoking the Restore Process

: Any

: Any except DC1000, DC3000

After you download and mount the ISO image, you are ready to invoke the restore 

process. If you are restoring an appliance to a different major version from the 

version currently installed on the appliance, a two-pass restore process is