Cisco Cisco Web Security Appliance S380 Installationsanleitung
12
The top two Fiber Optic ports are used as proxy ports in the
same way as the Ethernet proxy ports described in the following
table. The middle two Fiber Optic ports are used as traffic ports.
The bottom two Fiber Optic ports are used as Management
ports.
same way as the Ethernet proxy ports described in the following
table. The middle two Fiber Optic ports are used as traffic ports.
The bottom two Fiber Optic ports are used as Management
ports.
Item
Port
Description
1
Proxy port 1 Connect proxy port P1 to the
network for both incoming and
outgoing traffic.
outgoing traffic.
2
Proxy port 2 When both proxy ports P1 and P2
are enabled, you must connect P1 to
the internal network and P2 to the
Internet. P1 and P2 can connect to L4
switch, WCCP router, or network
switch.
the internal network and P2 to the
Internet. P1 and P2 can connect to L4
switch, WCCP router, or network
switch.
3
Traffic
Monitor
port 1
Monitor
port 1
Traffic monitor port T1 for Duplex
Ethernet tap: One cable for all
incoming and outgoing traffic.
Ethernet tap: One cable for all
incoming and outgoing traffic.
4
Traffic
Monitor
port 2
Monitor
port 2
Traffic monitor port for Simplex
Ethernet tap: One cable for all
packets destined for the internet
(T1), and one cable for all packets
coming from the Internet (T2).
Ethernet tap: One cable for all
packets destined for the internet
(T1), and one cable for all packets
coming from the Internet (T2).
5
Remote
Power Cycle
Power Cycle
The port that is used for Remote
Power Cycle (RPC).
Power Cycle (RPC).
6
Console
Indicates the console port that
directly connects a computer to the
appliance.
directly connects a computer to the
appliance.
7
Management
interface 1
interface 1
Indicates the Gigabit Ethernet
interface that is restricted to
management use only.
interface that is restricted to
management use only.
8
Management
interface 2
interface 2
Indicates the secondary Management
Port. This port cannot be used.
Port. This port cannot be used.