Cisco Cisco VC220 Dome Network Camera Wartungshandbuch

Applications > Events

VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide

69

values allow for easier motion detection. Set your percentage to low and 
the chances are greater that motion will be detected.

An event can be triggered by many sources, such as motion detection or external 
digital input devices. When an event is triggered, you can specify what kind of 
action will be performed. For example, you can configure the Cisco VC 220 
network camera to send buffered images to an FTP server and to send email 
notifications when motion is detected. 

A maximum of three events can be configured. 

Configure motion detection events in the following order:

1. Set up your servers to specify event delivery; see 

.

2. Configure your media; see 

.

3. Configure your event settings, such as triggers; see 

.

•

Media Name—Enter a descriptive name for the media setting.

•

Snapshot—Sends snapshots when a trigger is activated.

-

Source—Choices are Stream 1 or Stream 2.

-

Send # pre-event images (0-7)—Specify how many images to capture 
before a trigger is activated. Up to seven images can be captured. The 
default is 1 image.

-

Send # post-event images (0-7)—Specify how many images to 
capture after a trigger is activated. Up to seven images can be captured. 
For example, if both the Send pre-event images and Send post-event 
images are set to seven, a total of 15 images are captured after a trigger 
is activated. The default is 1 image.