Cisco Cisco Unified MeetingPlace Audio Server Wartungshandbuch
4-97
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Testing the installation
When the PBX does not use circular hunting
Step 1
Ask the PBX administrator for the dialing sequence that controls which port picks up the call.
Step 2
For each port, press
2
and listen for the “Enter your profile number” prompt. This ensures a full two-way
connection between the PBX/Central Office.
Step 3
We recommend that PBX/Telco hunt from highest port to lowest port.
Testing outbound calls
If MeetingPlace is connected to a PBX, it is necessary to test outbound calls placed to extensions on the
PBX as well as calls placed to the public network. A call should be made on each port. Outbound calls
should be tested on PSTN connections as well.
PBX as well as calls placed to the public network. A call should be made on each port. Outbound calls
should be tested on PSTN connections as well.
Step 1
Access the CLI. If you do not already have terminal logging turned on, turn it on before proceeding. For
information on logging, see the
information on logging, see the
Step 2
Type
activity
and press Enter.
command, refer to
Figure 4-99 activity Command Menu
Step 3
To make a test call, type
4
requesting a destination
telephone number.
meetingplace:tech$ activity
VUI Configuration: 1152 Sessions, 1200 Confs
*** VUI INTERNAL STATUS UTILITY ***
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100):