Cisco Cisco Unified MeetingPlace Audio Server Wartungshandbuch
4-81
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Configuring the system’s date and time
To configure the system’s date and time, the application software must be down. The “date” command
is used to set any portion of the date and time without specifying the higher parameters. For example,
you can set the hour without setting the day of the month, but you must specify the minutes when setting
the hour.
is used to set any portion of the date and time without specifying the higher parameters. For example,
you can set the hour without setting the day of the month, but you must specify the minutes when setting
the hour.
Caution
The server’s time zone must be set before setting the server’s date and time. If this has not been done
yet, complete the
yet, complete the
before proceeding.
Set the server’s date and time by following this procedure:
Step 1
Shut down the software by typing
down
and pressing Enter. (For more information about the “down”
command, see the
.)
Step 2
Type
y
and press Enter to verify that you want to shut down the system. The third and fourth lines in
appear.
Figure 4-83 down Command
Step 3
Wait about one minute and the fifth and sixth lines of
appear.
Step 4
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see
logging, see
.
Step 5
Type
date
and press Enter. The display shows the current date, time, and abbreviated time zone as shown
on the second line of
Figure 4-84 date Command
Step 6
Type
date
followed by a space and then type a date or time in any of the following formats:
•
yyyymmddhhmm — year, month, day, hour, minute
•
yymmddhhmm — year, month, day, hour, minute
•
mmddhhmm — month, day, hour, minute
•
hhmm — hour, minute
meetingplace:tech$ down
Are you sure (y/n)? y
Checking to see if the system is loaded...OK
System DOWN procedure has been initiated.
The system is DOWN.
meetingplace:tech$
meetingplace:tech$ date
Wed Oct 29 15:07:32 PST 2003
meetingplace:tech$ date 0310291508
Wed Oct 29 15:08:00 PST 2003