Cisco Cisco MeetingPlace Gateway SIM Anleitung Für Quick Setup

Perform one of the following tasks, depending on which device provides dial plan resolution for your 
network:

Choose this configuration option if the Cisco  IOS gatekeeper provides dial plan resolution for all devices 
in your network.

Configure voice call control. See the 

.

Configure the gatekeeper Cisco Unified Communications Manager. For instructions on adding the 
gatekeeper, see the Cisco Unified Communications Manager online help.

You perform this task in the Cisco IOS command-line interface (CLI) of the router. For more 
information about the Cisco IOS commands used in this procedure, see the Cisco IOS Commands 
Master List for your Cisco IOS release.

On the Cisco router, enter privileged EXEC mode or any other security level set by a system 
administrator. Enter your password if prompted.

Router# enable 

Enter global configuration mode.

Router# configure terminal 

Enter gatekeeper configuration mode.

Router# gatekeeper 

Define the zone controlled by the gatekeeper.

Router(config-gk)# zone local gk-zone-name domain-name 

Specify which subnets the gatekeeper will accept discovery and registration messages sent by endpoints 
in those subnets.

Router(config-gk)# no zone subnet gk-zone-name default enable 

Router(config-gk)# zone subnet gk-zone-name subnet1-address{/bits-in-mask | mask-address} 

 

Router(config-gk)# zone subnet gk-zone-name subnet2-address{/bits-in-mask | mask-address}