Cisco Cisco MeetingPlace Gateway SIM Anleitung Für Quick Setup

Open the certificate file for the Web Conferencing hostname in a text editor, and copy the text to the 
clipboard.

In the text box at the bottom of the page, paste the text from the certificate you obtained for this 
hostname.

Make sure the text you paste includes the begin and end certificate delimiters.

Select Install Certificate.

The host is now set up with a certificate.

Select Back to return to the main Administration page.

(Release 7.0.1 systems only) Repeat 

 through 

 for the Home Page hostname.

Proceed to the 

.

Complete this procedure to enable the Require SSL field on the Web Server administration page. 

Complete the 

Make sure that you are still on the SSL/TLS page.

Select Toggle SSL to turn SSL on.

Select Reboot Server. 

The server shuts down and restarts.

If the Web Server cannot validate the SSL certificates, the server will log an error and toggle 
SSL to off. In this case, you will need to restart the Cisco Unified MeetingPlace 
Web Conferencing service and fix the issue, then repeat the steps in this procedure.

When you restart the Web Server, all manual changes made to the registry are lost. 

Proceed to the 

Complete the