Cisco Cisco Agent Desktop 9.0 Installationsanleitung

Cisco CAD Installation Guide

154

August 4, 2014

NOTE: Community names are case sensitive. The word 

public

 must be all 

lowercase. 

c. Select one of the following SNMP options. 

— Accept SNMP Packets From Any Host

— Accept SNMP Packets From These Hosts

NOTE: If security is a concern, select this option. Using this option 
enables you to identify one or more specific machines that can send 
SNMP packets to this server.

d. If you selected Accept SNMP Packets From These Hosts, add the IP 

addresses for all of the servers on which CAD services are installed. 

NOTE: Do not use localhost or any other DNS name. Using DNS names 
might lead to problems if DNS does not properly resolve the hostnames to 
IP addresses.

8. Click Apply to save your changes, then OK to close the window.

9. Restart the SNMP service for the changes to take effect. 

Configuring Cisco SNMP Agent Management Service 
for use with CAD

1. Run mmc /32 to open the Microsoft Management Console window.

2. Choose File > Add/Remove Snap-in.

3. In the Add or Remove Snap-ins window, select Cisco SNMP Agent 

Management Tool from the Available snap-ins list, and click Add. The Cisco 
SNMP Agent Management Tool is moved to the Selected snap-ins list.

4. Click OK to close the Add or Remove Snap-ins window.

5. In the left pane of the Microsoft Management Console window, select Cisco 

SNMP Agent Management.

6. In the right pane, right click Community Names (SNMP...), and select 

Properties from the drop-down menu.

7. In the Community Names (SNMP...) Properties dialog box, click Add New 

Community.

a. In the Community Name field, enter 

public

. 

NOTE: Community names are case sensitive. The word 

public

 must be all 

lowercase. 

b. For SNMP Version, select SNMP v2c.