Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Cisco
  4. Cisco 4-Port OC-3c STM-1c ATM Shared Port Adapter
  5. Technisches Handbuch

Cisco Cisco 4-Port OC-3c STM-1c ATM Shared Port Adapter Technisches Handbuch

Download
Seite von 4
Router(config-controller)# au-4 1 tug-3 1
Router(config-ctrlr-tug3)#  
no tug-2 1 e1 1 loopback local
If interface doesn’t come up then try to do a shut-no-shut on the TUG as shown below:
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#controller SONET 3/0/0
Router(config-controller)# au-4 1 tug-3 1
Router(config-ctrlr-tug3)#  
tug-2 1 e1 1 shutdown
Router(config-ctrlr-tug3)#  no tug-2 1 e1 1 shutdown
5.
If interface still doesn’t come up then try to reconfigure the TUGS as shown below:
Router#
show running-config | sec controller SONET 3/0/0
controller SONET 3/0/0
 framing sdh
 clock source line
 aug mapping au-4
 !
au-4 1 tug-3 1
  mode c-12
  
tug-2 1 e1 1 channel-group 0 timeslots 1-8
  
tug-2 1 e1 1 channel-group 1 timeslots 13-14
  
tug-2 1 e1 1 channel-group 2 timeslots 9-12
<Output suppressed>
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#controller SONET 3/0/0
Router(config-controller)# au-4 1 tug-3 1
Router(config-ctrlr-tug3)#  
no tug-2 1 e1 1
Router(config-ctrlr-tug3)#  tug-2 1 e1 1 channel-group 0 timeslots 1-8
Router(config-ctrlr-tug3)# tug-2 1 e1 1 channel-group 1 timeslots 13-14
Router(config-ctrlr-tug3)# tug-2 1 e1 1 channel-group 2 timeslots 9-12
Note: Ensure to
configure all channel-groups for the TUG that you reconfigured.
6.
If all the interfaces are down under the controller, then check by giving soft loop to the
complete SONET controller.
Router#
show ip interface brief
Interface              IP-Address      OK? Method Status                Protocol
Serial3/0/0.1/1/1/1:0  192.168.1.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/1:1  192.168.2.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/1:2  192.168.3.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/1:3  192.168.4.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/1:4  192.168.5.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/1:5  192.168.6.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/2:0  192.168.7.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/2:1  192.168.8.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/2:2  192.168.9.1         YES NVRAM  down                  down    
Serial3/0/0.1/1/1/2:3  192.168.10.1      YES NVRAM  down                  down    
Serial3/0/0.1/1/1/3:0  192.168.11.1      YES NVRAM  down                  down   
Serial3/0/0.1/1/1/3:1  192.168.12.1      YES NVRAM  down                  down   
Serial3/0/0.1/1/1/3:2  192.168.13.1      YES NVRAM  down                  down   
Serial3/0/0.1/1/2/1:0  192.168.14.1      YES NVRAM  down                  down    
Serial3/0/0.1/1/2/2:0  192.168.15.1      YES NVRAM  down                  down    
Serial3/0/0.1/1/2/3:0  192.168.16.1      YES NVRAM  down                  down    
Router(config)#
controller sonet 3/0/0
Router(config-controller)#
loopback local
If the controller comes up (as show below) then issue is again not with the local card and
troubleshooting needs to be done on the remote end.
7.