Cisco Cisco Web Security Appliance S670 Betriebsanweisung
2-19
AsyncOS 9.1 for Cisco Web Security Appliances User Guide
Chapter 2 Connect, Install, and Configure
Using the P2 Data Interface for Web Proxy Data
Step 3
Choose the type of device that transparently redirects traffic to the appliance from the Type
drop-down list.
drop-down list.
Step 4
Submit and commit your changes.
Step 5
For WCCP v2 devices, complete these additional steps:
a.
Configure the WCCP device using device documentation.
b.
Add a WCCP service.
c.
If IP spoofing is enabled on the appliance, create a second WCCP service.
Related Topics
•
•
Configuring WCCP Services
A WCCP service is an appliance configuration that defines a service group to a WCCP v2 router. It
includes information such as the service ID and ports used. Service groups allow a web proxy to establish
connectivity with a WCCP router and to handle redirected traffic from the router.
includes information such as the service ID and ports used. Service groups allow a web proxy to establish
connectivity with a WCCP router and to handle redirected traffic from the router.
Adding and Editing a WCCP Service
Before You Begin
•
Configure the appliance to use a WCCP v2 Router (see
).
Step 1
Choose Network > Transparent Redirection.
Step 2
Click Add Service, or, to edit a WCCP service, click the name of the WCCP service in the Service
Profile Name column.
Profile Name column.
Step 3
Configure the WCCP options as described:
WCCP Service Option
Description
Service Profile Name
The name for the WCCP service.
Note
If you leave this empty and choose a standard service (see below),
the name ‘web_cache’ is automatically assigned here.
the name ‘web_cache’ is automatically assigned here.