Cisco Cisco MGX-FRSM-HS2 B Serial Frame Service Module Technisches Handbuch
Communication Media Module IP Connectivity
Document ID: 91263
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Configure
Configurations
Packet Flow
Troubleshoot
Commands
Example Outputs
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Configure
Configurations
Packet Flow
Troubleshoot
Commands
Example Outputs
Related Information
Introduction
This document provides detailed information about how IP connectivity is established with the
Communication Media Module (CMM).
Communication Media Module (CMM).
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on Cisco IOS 12.4.
Conventions
Refer to the Cisco Technical Tips Conventions for information on document conventions.
Background Information
Communication Media Module is a voice communication module that provides voice termination,
transcoding, and conferencing services. It can be installed on the chassis of a 6500 switch or a 7600 router.
transcoding, and conferencing services. It can be installed on the chassis of a 6500 switch or a 7600 router.
These adaptors can be installed on the CMM base module:
6−Port T1 / E1 Port Adaptor
•
24−Port FXS Port Adaptor
•
Ad−Hoc Conferencing and Transcoding (ACT) Port Adaptor
•