Cisco Cisco UCS C250 M1 Extended-Memory Rack-Mount Server Datenbogen
Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
10
BASE SERVER STANDARD CAPABILITIES and FEATURES
Interfaces
■
Rear panel
• One RJ45 serial port connector
• Two USB 2.0 port connectors
• One DB15 VGA connector
• Two RJ-45 10/100/1000 Ethernet port connectors
• One RJ-45 10/100/1000 Ethernet management port, using Cisco
• Two USB 2.0 port connectors
• One DB15 VGA connector
• Two RJ-45 10/100/1000 Ethernet port connectors
• One RJ-45 10/100/1000 Ethernet management port, using Cisco
Integrated Management Controller (CIMC) firmware
■
Various PCIe card ports (dependent on which cards are installed)
• Converged Network Adapter (CNA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports
■
Front panel
• One KVM console connector (supplies two USB, one VGA, and one
serial connector)
WoL
The 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL)
standard.
standard.
InfiniBand
The bus slots in this server support the InfiniBand architecture.
Front Panel
A front panel controller provides status indications and control buttons
Power subsystem
Up to two 450 W (AC) , 650 W, (AC), or 930 W (DC) power supplies. One is
mandatory; one more can be added for 1 + 1 redundancy.
ACPI
This server supports the advanced configuration and power interface (ACPI)
4.0 standard.
Fans
Chassis:
■
Five hot-swappable fans for front-to-rear cooling
Power supply:
■
Each power supply is equipped with a fan.
Integrated management
processor
BMC running Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the
Depending on your CIMC settings, the CIMC can be accessed through the
1-GbE dedicated management port, the 1-GbE LOM ports, or a Cisco virtual
interface card (VIC).
Capability/Feature
Description