Cisco Cisco UCS C250 M1 Extended-Memory Rack-Mount Server Datenbogen

 lists the capabilities and features of the base server. Details about how to configure the server for 

a particular feature or capability (for example, number of processors, disk drives, or amount of memory) 
are provided in 

.

Chassis

One rack unit (1RU) chassis

CPU

One or two Intel® Xeon E5-2600 v2 or E5-2600 series processor family CPUs

Chipset

Intel® C600 series chipset

Memory

16 slots for registered or unbuffered ECC DIMMs (RDIMMs or UDIMMs) or 

load-reduced DIMMs (LRDIMMs)

Multi-bit Error 

Protection

This server supports multi-bit error protection.

NIC 

Embedded dual-port Intel i350 PCIe-based Gigabit Ethernet controller, 

supporting the following:

■

Pre-Execution Boot (PXE boot)

■

iSCSI boot

■

Checksum and segmentation offload

■

NIC teaming

Expansion slots

Two PCIe slots (on a riser card)

■

One full-height profile, half-length slot with x24 connector and x16 lane

■

One half-height profile, half-length slot with x16 connector and x8 lane

Internal storage devices

Drives are installed into front-panel drive bays that provide hot-pluggable 

access.

■

Small Form Factor (SFF) drives. Up to eight 2.5-inch SAS or SATA 

hot-swappable hard disk drives (HDDs) or solid state drives (SSDs)

■

The server also contains one internal USB 2.0 port on the motherboard 

that you can use with a USB thumb drive for additional storage

■

UCS Storage Accelerator are also available. These PCIe flash storage 

devices provide independent high-speed storage.

Cisco Flexible Flash 

drives

The server supports up to two internal 32 GB Cisco Flexible Flash drives (SD 

cards).
The second SD card is blank and can be used to mirror the first SD card. It 

can be used to protect the Hypervisor Partition with RAID1.