Cisco Cisco VN 2900 Network Adaptation Interface Installationsanleitung

To prevent damage to the interface card, turn off electrical power and disconnect network cables from 
the chassis before inserting an interface card into an installed network module or router slot.

Using a number 1 Phillips or flat-blade screwdriver, loosen the screws on the blank interface card 
faceplate. (See 

 and 

.) Remove the blank faceplate. 

1

Save blank interface card faceplates for future use.

Align the interface card with the guides in the slot on the network module and slide it gently into place 
until the edge connector is seated into the connector on the module. (See 

.)

Using a number 1 Phillips or flat-blade screwdriver, tighten the captive mounting screws into the holes 
on the network module faceplate.

Reinstall the network interface cables and power up the router. 

The following warning applies to routers that use a DC power supply:

302410

302435

Interface card

2-slot network module

H7219