Cisco Cisco SM-X Layer 2 3 EtherSwitch Service Module
Cisco SM-X Layer 2/3 EtherSwitch Service Module Configuration Guide for Cisco 4451-X ISR
How to Configure the Cisco SM-X Layer 2/3 ESM on the Router
9
Cisco SM-X Layer 2/3 EtherSwitch Service Module Configuration Guide for Cisco 4451-X ISR
Figure 2
Layer 3 Feature Configuration
In
, you should configure PBR under BDI1 instead of configuring it under interface
Ethernet-internal1/0/0.
Figure 3
Layer 3 Feature Configuration
How to Configure the Cisco SM-X Layer 2/3 ESM on the Router
The SM-X configuration includes SM-X module side configuration and host side configuration. The
SM-X module’s configuration is the same as common C3560E switch. To configure layer 3 features (For
example HSRP, PBR and Nat etc), you can configure it on host side BDI or SVI interfaces on host side.
Layer 3 sub-interface is represented by different BDI/SVI interface on host side.
SM-X module’s configuration is the same as common C3560E switch. To configure layer 3 features (For
example HSRP, PBR and Nat etc), you can configure it on host side BDI or SVI interfaces on host side.
Layer 3 sub-interface is represented by different BDI/SVI interface on host side.
Configuration on SM-X Module Side
•
•
•