Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Cisco
  4. Cisco Firepower Management Center 2000
  5. Entwickleranleitung

Cisco Cisco Firepower Management Center 2000 Entwickleranleitung

Download
Seite von 180
 
2-4
FireSIGHT System Database Access Guide
 
Chapter 2      Setting Up Database Access 
  Downloading the JDBC Driver
Step 1
On the Defense Center, select 
System > Local > Configuration
.
Step 2
Click 
Database
.
The Database Settings menu appears.
Step 3
Select the 
Allow External Database Access 
check box. 
The 
Access List
 field appears.
Step 4
Type the fully qualified domain name (FQDN), or IPv4 address, of the Defense Center in the 
Server 
Hostname
 field, depending on your third-party application requirements. You cannot use an IPv6 address 
as you cannot use an IPv6 address to install a certificate.
If you type an FQDN, you must make sure that the client can resolve the FQDN of the Defense 
Center. If you type an IP address, you must make sure that the client can connect to the Defense 
Center using the IP address.
Step 5
To add database access for one or more IP addresses, click 
Add Hosts
.
An 
IP Address
 field appears in the 
Access List
 field.
Step 6
In the 
IP Address
 field, you have the following options, depending on the IP addresses you want to add: 
  •
an exact IPv4 address (for example, 
192.168.1.101
)
  •
an exact IPv6 address (for example, 
2001:DB8::4
)
  •
an IP address range using CIDR notation (for example, 
192.168.1.1/24
)
  •
For information on using CIDR in the FireSIGHT System, see IP Address Conventions in the 
FireSIGHT System User Guide.
  •
any
, to designate any IP address
Step 7
Click 
Add
.
The IP address is added to the database access list. 
Step 8
Optionally, to remove an entry in the database access list, click the delete icon (
).
Step 9
Click 
Save
.
The database access settings are saved.
Step 10
Continue with the procedure in the next section, 
Downloading the JDBC Driver
License: 
Any
After you create an External Database user and configure the Defense Center to allow database access, 
download the JDBC driver to the client system. You must use this JDBC driver to connect to the 
database. 
To download the JDBC driver:
Access: 
Admin
Step 1
On the Defense Center, select 
System > Local > Configuration
. 
Step 2
Click 
Database
.