Cisco Cisco MDS 9000 SAN-OS Software Release 1.0
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
8
Cisco MDS 9000 Family Release Notes for Storage Services Interface Image Release 4.1(3k)
OL-17791-07
Limitations
Limitations
This sections lists limitations or restrictions associated with this release.
Configuring SSM Ports in Auto Mode
Starting with Cisco MDS SAN-OS Release 3.0(1), the SSM front panel ports can no longer be
configured in auto mode. Because auto mode is the default for releases prior to Release 3.0(1), you
should modify the configuration of the ports before upgrading the SAN-OS software image to NX-OS
Release 4.1(3) to avoid any traffic disruption.
configured in auto mode. Because auto mode is the default for releases prior to Release 3.0(1), you
should modify the configuration of the ports before upgrading the SAN-OS software image to NX-OS
Release 4.1(3) to avoid any traffic disruption.
For information on how to reconfigure the SSM ports, refer to the “Reconfiguring SSM Ports Before
Upgrading to NX-OS Release 4.1(3)” section of the
Upgrading to NX-OS Release 4.1(3)” section of the
Compatibility Matrix
Before upgrading your SSI image, refer to the
and to Table 11 in the
. Use Table 11 to determine your nondisruptive upgrade path to Cisco MDS NX-OS
Release 4.1(3).
Caveats
This section lists the open and resolved caveats for this release. Use
to determine the status of a
particular caveat. In the table, “O” indicates an open caveat and “R” indicates a resolved caveat.
Resolved Caveats
•
CSCtc20658
Symptom: The OCTEON data path processor (DPP) failed during PWL exception handling.
Workaround: This issue is resolved.
Table 2
Open and Resolved Caveats for Cisco MDS SSI Release (4.1(3k)
DDTS Number
Status
Severity 2
R
Severity 3
R
R