Cisco Cisco IOS Software Release 12.0(23)S

Stateful Switchover

Configuration Examples

Cisco IOS Release 12.0(23)S

Copying an Image onto an RP Examples

The examples in this section copy an SSO-aware software image to Flash memory on each of the RPs.

This section includes the following examples:

•

Copying an Image onto the Active and standby RPs on the Cisco 7500 Example

•

Copying an Image onto Active and standby RPs on the Cisco 10000 Example

•

Copying an Image onto Active and standby RPs on the Cisco 12000 Example

Copying an Image onto the Active and standby RPs on the Cisco 7500 Example

This example copies an SSO-aware software image to Flash memory on each of the RSPs of a
Cisco 7500 series router.

Router# copy tftp slot0:rsp-pv-mz

Router# copy tftp slaveslot0:rsp-pv-mz

The system will prompt you for additional server and filename information for each copy command.

Copying an Image onto Active and standby RPs on the Cisco 10000 Example

This example copies an SSO-aware software image to Flash memory on each of the PREs of a
Cisco 10000 series Internet router.

Router# copy tftp disk0:c10k-p10-mz

Router# copy tftp stby-disk0:c10k-p10-mz

The system will prompt you for additional server and filename information for each copy command.

Copying an Image onto Active and standby RPs on the Cisco 12000 Example

This example copies an SSO-aware software image to Flash memory on each GRP of a Cisco 12000
series Internet router.

Router# copy tftp slot0:gsr-p-mz

Router# copy tftp stby-slot0:gsr-p-mz

The system will prompt you for additional server and filename information for each copy command.

Setting the Configuration Register Boot Variable Examples

The examples in this section configure the configuration register boot variable to boot from Flash and
then reload each of the RPs with the new image: